Radio Remote Control Transmitter and Receiver

 The Anand device transmitter is designed to transmit command Signals for controlling EOT cranes, hoists, and machines. 12 control instructions plus the included emergency button are to be had to the operator. The radio remote control includes the transmitter, inner alkaline batteries, and a receiver. The transmitter housing with an integrated antenna is made from impact-resistant plastic.

Anand Radio Remote Control for EOT cranes are available in different types i.e., Anand 8 Button, Anand 12 Button, Anand Joystick remote control, and wireless remote control

ANAND 8 BUTTON

Anand 8 Button is the powerful and up to 3 motions radio remote control for cranes. It is a handheld device to control industrial cranes. eot crane remote is available in single and Dual Speeds. Another feature of Radio remote control is having the ability to cross and long travel.

Anand 12 Button

ANAND 12 BUTTON

Anand 12 Button is a powerful, handheld radio remote control for overhead cranes. It is up to 4 motions. 12 button transmitter speed is single and dual. Ability to travel long.

JOYSTICK RADIO REMOTE CONTROL

Joystick remote controls will have as many as five steps in every direction. The joystick can be configured in many different options such as spring return, lock type, locks, analog output, and digital output. Joystick radio remote controls with potentiometers can be used to wirelessly control the speed of frequency converters, proportional control of hydraulic pumps, etc.

Functions of Crane Remote Control

Features of Crane remote control system is as follows

1. Tandem mode

Tandem mode is controlled by the selector switch. During this mode, the radio remote is synchronized with multiple receivers.

 


2.     Customized Radio Range

Wireless radio remote controls can transmit and receive the signal at a range of above 200 meters. Anand crane remotes are designed to transmit signals long distances with less power.

 

3.     Communication System

In crane remote control, advanced closed-loop communication systems are used. In radio remote System, closed-loop communication between transmitter and receiver. The transmitter transmits the signal and receives that signal and gives you the required feedback.

 

4.     Digital Address Used

All crane remote control systems used an 8-byte address. An 8-byte digital address is assigned to a transmitter and receiver.

 

5.     Configurable Receiver

Radio receivers have 2 to 8 relays. The relay contact rating is 275Vac at 10 Amps. The Receiver operates in 30mWatt power consumption and saves electricity. It gives the signal indication with the help of a power indication lamp. Another feature is having a mainline contactor on/off indicator.

 

Applications of Radio Remote Controls

·       EOT Cranes
·       Electric Hoist
·       Jib Cranes
·       Goliath Cranes
·       Mobile Cranes
·       Gantry Cranes
·       Tower Crane, and so on

 

Here are types of Radio Remote Control for cranes with their features. Choose a radio control remote based on different parameters and features. Anand Systems Engineering Pvt. Ltd. is a leading crane remote control manufacturers in India. For more details visit our official website https://www.anandcontrol.in/radio-remote-control/anand-remote.html

Comments

Post a Comment

Popular posts from this blog

Guide: How to find "bus bar disconnection"

Image
Technology Online posted the maintenance experience of a company called Chemitox. Usually, this type of article is written as part of a product or service introduction, but this article has no such promotion and is simple but good information. Busbar contact failures and disconnections are typical of solar power generation failures. Apparently, it was discovered by an AIST mega solar inspection last year. The current panel may have been improved, but I think disconnection and poor contact of the copper busbar manufacturers in India . In this article, photos of burnt cells and broken panels due to poor busbar contact are introduced and will be helpful. It is desirable to find and replace such panels as soon as possible, but they are difficult to find until they burn or crack. Although the article points out that monitoring the power generation of the strings may help to detect them at an early stage, I think that there are not many systems that can monitor each
Read more

Why crane remote control?

Image
A radio remote control is widely used for operating a crane. A crane control equipment has many benefits like safety, enhance productivity, flexibility, etc.  Here are few reasons why use a wireless radio remote control for cranes? Operator and workplace safety Radio remote creates a safer work environment. Because of wireless radio remote control reduces the risk of injury when moving loads. Radio remote controls also provide crane operators with a wider view of the work area to ensure that the load path is clear and that personnel is not in danger. Remote control cranes easily allow the operator to avoid barriers on the floor or work area. A crane pendant push buttons are wired to the crane, therefore, the operator needed to operate the crane sitting inside the crane cabin or near the crane. Easy to use Radio remote controls are easy to use. Anand crane control devices are manufactured by advanced software and modern technology. Different indications like low battery indicator, emer
Read more

How to select Radio Remote Control for Cranes

Image
Today Radio Remote control is used in industries such as construction and manufacturing. An industrial Radio Remote Control can either be operated by a human, or by a computer control system in an M2M (machine to machine) mode. This is the complete guide for choosing radio remote control for overhead and EOT cranes. The following steps are used to select an Industrial Radio Remote Control for EOT cranes and Overhead cranes.   1. Based on Technology 2. Safety of the wireless system 3. Environment where crane Radio will be used 4. Based on Ergonomics 5. Integration of radio remote control with the crane control panel 6. Service and support Now, we see a brief description of the above points 1.     Based on Technology RF Technology- To select Radio Remote control some things to consider which is RF (Radio Frequency) technology, Frequency hopping algorithm means Modern Radio Remote controls can change the frequency of operation at will. In crane radio remote control sy
Read more