What is a radio remote control?

Radio remote control is used to control any type of machinery or equipment with the help of radio waves. It is a small, handheld device that is used for controlling another device. Some radio remote operates via infrared waves and some used radiofrequency.

An industrial radio remote control that uses radio frequency waves to control heavy cranes is called an industrial crane remote control system. Radio remote is used in EOT cranes, hoist cranes, overhead cranes, etc.

Types of radio remote control for cranes-

Now, we will see the types of radio remote control

The remote control device has two units, transmitter, and receiver. Anand systems design the 8-button radio remote control for overhead crane, 12 button radio remote control, Joystick radio remote control. Anand transmitter device is designed to transmit the data signal for controlling any type of crane.


Anand 8 button transmitter is a handheld, can have up to 3 motions. It can cross travel and long travel. The speed of this type of device is single and dual.

Anand 12 button is powerful and it can have up to 4 motions. It can cross and long travel, available in single and dual-speed.

Joystick remote control for industrial crane and any kind of machinery. Features of joystick remote are it has 5 steps per direction, rechargeable batteries, waist strap, and ergonomic shoulder. We are the customized radio remote control manufacturers in India.

Let see about the radio receiver

The receiver picks up the data from the transmitter and decodes it. This decrypted data is assigned to relay to activate the desired switch of the crane control panel. Anand receivers use the RF (Radio Frequency) technology and are compatible with Anand 8 button and 12 button transmitters. Anand receivers can be completely configured according to the customer’s specification. It's available in the small and big receivers.

How does crane wireless remote control works?

As we know, the crane radio remote control has a transmitter and receiver unit. The transmitter is a portable and handheld device. Every push button present on the remote control creates a combination of signals for the crane receiver.

The transmitter encodes this signal then transmits the encrypted data to the receiver. A receiver receives this data and decodes it and switches on an assigned relay. This assign relay activates the desired switch on the eot crane control panel. This communication happens more than 10 times in a second.

The transmitter of the radio remote control can continuously check different parameters of the communication link like signal strength, no. of successful transmission, missed data packets, etc. Anand radio remote uses the use automatic frequency hopping technique to avoid any interference from other radio signals and increase the safety of the wireless remote control crane.

Applications of radio remote control for cranes:

Radio remote control is used in many applications, some of these are as follows-

·         EOT Cranes

·         Tower Cranes

·         Gantry Cranes

·         Mobile Cranes

·         Electric hoists

·         Goliath Cranes, etc.

The best radio remote control for cranes are manufactured by Anand Systems Engineering Pvt. Ltd. Which is ultra-reliable, cost-effective, and customizable according to any crane. For more details get in touch with us- Anand Systems Engineering Pvt. Ltd.

Comments

Post a Comment

Popular posts from this blog

Guide: How to find "bus bar disconnection"

Image
Technology Online posted the maintenance experience of a company called Chemitox. Usually, this type of article is written as part of a product or service introduction, but this article has no such promotion and is simple but good information. Busbar contact failures and disconnections are typical of solar power generation failures. Apparently, it was discovered by an AIST mega solar inspection last year. The current panel may have been improved, but I think disconnection and poor contact of the copper busbar manufacturers in India . In this article, photos of burnt cells and broken panels due to poor busbar contact are introduced and will be helpful. It is desirable to find and replace such panels as soon as possible, but they are difficult to find until they burn or crack. Although the article points out that monitoring the power generation of the strings may help to detect them at an early stage, I think that there are not many systems that can monitor each
Read more

Why crane remote control?

Image
A radio remote control is widely used for operating a crane. A crane control equipment has many benefits like safety, enhance productivity, flexibility, etc.  Here are few reasons why use a wireless radio remote control for cranes? Operator and workplace safety Radio remote creates a safer work environment. Because of wireless radio remote control reduces the risk of injury when moving loads. Radio remote controls also provide crane operators with a wider view of the work area to ensure that the load path is clear and that personnel is not in danger. Remote control cranes easily allow the operator to avoid barriers on the floor or work area. A crane pendant push buttons are wired to the crane, therefore, the operator needed to operate the crane sitting inside the crane cabin or near the crane. Easy to use Radio remote controls are easy to use. Anand crane control devices are manufactured by advanced software and modern technology. Different indications like low battery indicator, emer
Read more

How to select Radio Remote Control for Cranes

Image
Today Radio Remote control is used in industries such as construction and manufacturing. An industrial Radio Remote Control can either be operated by a human, or by a computer control system in an M2M (machine to machine) mode. This is the complete guide for choosing radio remote control for overhead and EOT cranes. The following steps are used to select an Industrial Radio Remote Control for EOT cranes and Overhead cranes.   1. Based on Technology 2. Safety of the wireless system 3. Environment where crane Radio will be used 4. Based on Ergonomics 5. Integration of radio remote control with the crane control panel 6. Service and support Now, we see a brief description of the above points 1.     Based on Technology RF Technology- To select Radio Remote control some things to consider which is RF (Radio Frequency) technology, Frequency hopping algorithm means Modern Radio Remote controls can change the frequency of operation at will. In crane radio remote control sy
Read more