What is modern crane remote control?

In modern technology, increases the demand for crane remote control in industries. All industries want the safety of workers and workstations so, the use of wireless radio remote control is raised. A radio remote control is used to control any type of equipment and handling heavy material. A crane remote control is small, portable, and handheld device. Crane wireless remote control devices are available in various types.

The bridge crane is an overhead crane. It is a machine that is used to lift and move heavy equipment from one place to another. Bridge cranes are used to move heavy materials over long distances. Remote control systems for bridge cranes cover a longer distance compared to other cranes. These cranes are used in the automotive, manufacturing, steel, warehouse, and construction industries. Depending on the location and travel distance, single or double girder, JIB overhead cranes can be used.

radio remote control
radio remote control

How to control crane accidents using crane control equipment?

A crane accident is common while operating the crane but recently crane accidents is reduced due to crane wireless remote control devices. There are three main areas of risk in any crane operating process: contact of metal parts with the power supply, falling material, and overloading. The failure of one or more components can also cause an accident.

Other causes of crane accidents are unstable crane, heavy load, improper planning, lack of knowledge, and defective components in crane, etc. to avoid an accident crane control equipment is the best solution. Wireless remote control for cranes is helping to control crane operation and avoid a hazardous situation.

A radio remote has two units that are transmitter and receiver. The transmitter transmits the signal generated from the crane remote push button. This signal is in digital form, this encoded signal transmits towards the receiver through an air medium.

The receiver receives an encrypted signal and decodes it. And sends to an assigned relay. The relay activates or deactivates the switch on eot crane control panel. An emergency stop key plays an important role. When the emergency stop button is press then the crane will automatically stop working and avoid any accident.

The transmitter and receiver communication happen more than 10 times in a single second. The transmitter continuously checks the various parameters such as the number of lost data packets, number of successful transmissions, and transmitted and received signal strength.

Types of crane wireless remote control

As we know radio remote control for crane has a transmitter and receiver. Anand wireless radio remote transmitter available in 8 button radio remote control, 12 button radio remote, Joystick wireless remote control.

8 button and 12 button radio remote control working function are same but the difference in no, of push buttons. In 8 button remote control transmitter 8 push buttons that are up-down, forward – reverse, Left- Right, stop and start alarm. And in 12 button push buttons are the same but some extra push buttons are Aux up-down and spare, light on/off button. All transmitters and receivers are highly configurable and customizable and adaptive to any crane.

Modern wireless remote control for overhead crane offers

Modern crane control equipment offers the following features

1.       Safety features

2.      Tandem remote control

3.      Advanced software and technology

4.      Emergency Stop

5.      Better reliability and productivity

6.      Worldwide 2.4 GHz frequency

Benefits of radio remote control

Modern crane control devices offer many advantages. Overall, the latest crane control technology gives the operator much more control over the movement, speed, and positioning of the hoist. Controls provide additional security measures to ensure the safety of employees and equipment from damage. Crane controls allow cranes to become part of control automation systems that improve and optimize production.

Conclusion

Crane control devices are used in the control of different types of cranes. Modern technology and advanced software help to improve the performance and safety of cranes. Anand Systems Engineering crane remote control manufacturers in Mumbai. Anand Systems manufactures radio remotes using advance and recent technology. Anand crane control remote is highly configurable and suitable for any type of crane.


Comments

Post a Comment

Popular posts from this blog

Guide: How to find "bus bar disconnection"

Image
Technology Online posted the maintenance experience of a company called Chemitox. Usually, this type of article is written as part of a product or service introduction, but this article has no such promotion and is simple but good information. Busbar contact failures and disconnections are typical of solar power generation failures. Apparently, it was discovered by an AIST mega solar inspection last year. The current panel may have been improved, but I think disconnection and poor contact of the copper busbar manufacturers in India . In this article, photos of burnt cells and broken panels due to poor busbar contact are introduced and will be helpful. It is desirable to find and replace such panels as soon as possible, but they are difficult to find until they burn or crack. Although the article points out that monitoring the power generation of the strings may help to detect them at an early stage, I think that there are not many systems that can monitor each
Read more

Why crane remote control?

Image
A radio remote control is widely used for operating a crane. A crane control equipment has many benefits like safety, enhance productivity, flexibility, etc.  Here are few reasons why use a wireless radio remote control for cranes? Operator and workplace safety Radio remote creates a safer work environment. Because of wireless radio remote control reduces the risk of injury when moving loads. Radio remote controls also provide crane operators with a wider view of the work area to ensure that the load path is clear and that personnel is not in danger. Remote control cranes easily allow the operator to avoid barriers on the floor or work area. A crane pendant push buttons are wired to the crane, therefore, the operator needed to operate the crane sitting inside the crane cabin or near the crane. Easy to use Radio remote controls are easy to use. Anand crane control devices are manufactured by advanced software and modern technology. Different indications like low battery indicator, emer
Read more

How to select Radio Remote Control for Cranes

Image
Today Radio Remote control is used in industries such as construction and manufacturing. An industrial Radio Remote Control can either be operated by a human, or by a computer control system in an M2M (machine to machine) mode. This is the complete guide for choosing radio remote control for overhead and EOT cranes. The following steps are used to select an Industrial Radio Remote Control for EOT cranes and Overhead cranes.   1. Based on Technology 2. Safety of the wireless system 3. Environment where crane Radio will be used 4. Based on Ergonomics 5. Integration of radio remote control with the crane control panel 6. Service and support Now, we see a brief description of the above points 1.     Based on Technology RF Technology- To select Radio Remote control some things to consider which is RF (Radio Frequency) technology, Frequency hopping algorithm means Modern Radio Remote controls can change the frequency of operation at will. In crane radio remote control sy
Read more